File Photo
The principle of the rice mill is to rotate the rice grains and flip the motion. Rotation is the rotation movement of rice grains in the direction of the short axis, and flipping is the rotation of grains in the direction of the short axis. In the entire processing process of grinding rice into rice, it is necessary to roll the motion so that every position of rice grains can equally accept the effect of the rice mill, so that the rice is uniform, and the rice is not sufficient or partial. 1. The speed direction of the rice grains when rolling away from the ribs caused by the white roller of the rice mill is at an Angle with the broken line, so that the impact frequency of the rice grains at a diameter is higher and the rolling frequency is higher.
2. Rice mill rice knife. Round hole sieve. Caused by the turning of the rice knife speed move, reach the rice knife, etc., at the forefront of the rice knife bounce back home, bounce speed, speed direction Angle, can not flip, flip the rice knife, move fast, move fast, move fast. White indoor rice knife. Round screen. When the number is long, the number of rolls is high, and vice versa; However, it can not be increased without limit, due to the structure of the grinding chamber and the factors affecting the actual effect of the processing technology.
3. The rolling air blast caused by the rice milling machine is becoming wider and wider, and the wind is ejected from the inside of the white roller to the hole or groove on the surface under a certain working pressure, and the ejected wind generally exceeds the floating rate of rice grains. After the gas enters the white grinding chamber, the volume expands, the working pressure decreases, the mixed gas is produced, and the rice grains roll in the vortex.
A rice mill is a machine and equipment for people to process grain and oil, so we often in the application of rice to often carry out maintenance to increase its service life, what is the rice mill in the usual maintenance work? Take a look at the rice mill editor.
1. After rice milling, it is necessary to maintain a certain dry humidity, and the general water content shall not exceed 14% and 15%. When the water content of rice is too high, it is crushed into rice, which harms the quality of rice, and the consumption driving force is also related to the expansion of rice.
2. Be careful to check whether there are steel nails in the rice. Stones and other dirt, so as not to enter the grinding room cause blockage or damage to the rice sieve.
3. When starting, first run no-load to all normal speed ratio, and then pour the straw into the hopper, and always pay attention to the operation of the rice.
4. Before starting, check the components such as the rice knife and barrel core, and check the anchor bolts. Whether the nut has torque.
5. Rotate the drum before starting and ask if there is a stopper.
6. After the end of work every day, check the rice mill and service facilities and deal with any problems in a timely manner to ensure that the rice mill is often in good condition.
Source: Online/GFMM
Comment Now